Nowadays, households almost always use hoods. Although it is simple in structure, it has a motor and a fan. But with it in the kitchen, the obvious fumes will be much reduced, especially for those who like to cook more oil. However, the range hood also needs regular cleaning, especially the oil net that hangs oil. If it is not cleaned for too long, the oil net is blocked by oil, and the hood can't be used. So how do you clean the oil net? Let us Let's take a look.
1, boil water
The oil hood of the hood will not be cleaned for a long time, and a lot of oil will be hung on it. Generally, they will slowly drop into the oil storage tank along the oil net. Therefore, to clean the oil net, first let the oil hang on the oil net. Just drop into the oil storage box. In the beginning, we can first boil water under the hood.
2, wait about ten minutes
Let the water burn all the time, turn on the hood, and let the hood absorb the water vapor. About ten minutes or so, you will find that the oil on the oil net flows down the oil net to a part of the oil storage box, so that it is easier to clean underneath.
3, remove the oil network
Unscrew the oil storage box, then unscrew the oil mesh and remove the oil net. Generally, the hood has two or four screws. If you look it up carefully, you can unscrew it and it is very simple.
4, oil net soak
Pour the prepared detergent into the basin, heat the water, and then soak the oil mesh inside, for about fifteen minutes. Here, it is possible to use alkali, vinegar or strong degreaser. Of course, if there are conditions, it is recommended to use a strong degreaser. This degreaser that specifically removes oil can completely remove the oil.
5, cleaning oil net
Clean the oil net with a rag and hot water. If there is oil, put some degreaser to wipe it. If the oil is too thick for a long time, the oil is too thick, you can use a steel ball or a brush to remove the oil from the oil mesh and wipe it with a rag until the oil is cleaned.
6, scrubbing detergent
Dry the oil net and apply a layer of detergent on the dried oil net. This will give the oil net a protective film that will become much easier in the next cleaning. However, the interval between cleanings should not be too long, otherwise the accumulation of soot will be too thick, and the detergent on the wipe will lose its usefulness.
7, put back the hood
When the other parts of the hood are also cleaned and the outer casing is wiped clean, the oil net is installed back, so that the cleaning of the oil net is completed. Then try it out and see if there are any problems with the installation. If it works, then everything is ok.
Baoji zhipu non-ferrous metal processing co., LTD. Main processing single crystal furnace, vacuum furnace, furnace, such as sapphire molybdenum, tungsten, tantalum, niobium tungsten bars, tungsten bars, tungsten thermal field pipe fittings such as deep processing, domestic use of the best quality raw materials, equipped with advanced equipment and professional production team, welcome to inquire, looking forward to your cooperation!
Tantalum Bar,Good Stability Tantalum Bar,High Purity Tantalum Bar,Polished Tantalum Bar
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com