When you go home late from work, is there always a light with a bright glow waiting for you to return? When you are far away, do you always miss the happy time that your family has chased under the lights? At this moment, do you think of the distant home in the light, the place that carries the emotions of the most important people in life? However, if you want to keep the light bright all the time, then we have to carefully maintain it on a daily basis. The following small series tells you some ways to maintain the lamps.
First, see the instructions
The small hardware of the global hardware network suggests that after buying the lamps, don't be busy with the installation. You should carefully look at the markings of the lamps and read the installation instructions, and then install and use the lamps according to the instructions. Otherwise, danger may occur.
Second, problems occur in time to replace
According to the light source parameters provided by the sign, replace the aging lamp in time, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the ballast from burning out. Waiting for insecurity.
Third, do not change the structure of the luminaire
During cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the parts of the luminaire. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced.
Fourth, do not switch frequently
When using the luminaire, try not to switch frequently, because the current through the filament is higher than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life. Reduce the switch of the luminaire.
Fifth, the correct maintenance
The luminaires must be intensified during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the brightness of the lamp; the light-colored lampshade has good transparency, but it is easy to be dusted, so it should be diligently wiped to avoid affecting the penetration of light; If it is non-metallic, wipe it with a damp cloth to avoid dust accumulation and affect the lighting effect.
Moisture can cause rust and paint to fall off, and shorten the life of the luminaire. Therefore, moisture protection is the key to lighting maintenance, especially the bathroom, bathroom lamps and kitchen stove lights, should be installed with moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or leakage short circuit.
Xiaobian recommends that the lamps should not be washed with water. The daily dust should be wiped with a dry cloth and wiped with water. After turning on the lights, do not wipe them with a damp cloth. (Global Hardware Network Xiong Qi / Wen)
Concerned about surprises
Label: Maintenance of lamps
Previous: Working principle of electric sleeve regulating valve Next: Working principle of common instrument gate valve
Square Stone Texture Pu Sandwich Panels
Rich selection of textures and colors meet different decoration requirements, giving the city and the buildings a new look.
The PU foam is the most advanced and eco-friendly insulation material in the world. With the help of the back aluminum foil, the thermal preservation effect achieves the best.
The unique structure prevents the heat loss in winter. Meanwhile it reduces the heat of the summer sunshine.
Aceta paintcoat and flurocarbon paint of weather resistance performance are applied on surface of wall panel. It is reserved with superior self-cleaning, weather resistance, corrosion resistance and acid& alkali resistance performance.
Light weight with 3.7Kgs/m2 makes the installation easy.
The installation process is clean and tidy without any noise and dust, construction waste.
Different selections of accessories meet different effects.
High quality and stable performance: Manufactured in CNC automation production line, the product pass rate can reach 99.9% with stable chemical structure and physical structure.
Square Stone Texture PU Sandwich Panels
Foam Insulation Sheets,Metal Insulation Exterior Wall Panel,Insulation Wall Foam Panel,Square Stone Texture Pu Sandwich Panels
Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com