Every year at the end of the year, there will always be many families with water seepage on the walls of the bathroom. Since the end of the year is exceptionally busy, some heads of household will simply wait until the end of the year to resolve the problem. They do not know that by the end of the year, even greater harm will come. The surface-mounted tiles began to roll down and the surface of the suspended ceiling was painted black hair, which was even ugly. When it comes to knowing the dangers of leaks not being resolved in time, I will teach you how to find the cause of the problem.
Knowing the Root Cause of Water Leakage on the Wall
There are two types of leaks in the wall of a bathroom. One is the leakage of the water pipe and the other is the leakage of the waterproof layer. Therefore, when solving the problem of water leakage in the bathroom wall, it is necessary to distinguish clearly what causes the leakage.
To judge the water pipe problem: First, look at the direction of the water pipe according to the construction plan. If there is a water pipe buried behind the water leaking position, you can take a trip or not at home, turn off the sluice in the house, and clear the water inside the faucet. If after a while, It was found that the water traces on the wall had disappeared, which proved to be a problem with the water pipes.
Judging the problem of the waterproof layer: After the shower, the wall on the back surface of the bathroom was leaking. After a while, it was found that the leakage of the wall surface was improved. It was proved that there was a problem with the waterproof layer.
Cleverly solve the problem
After finding the cause of water leakage from the bathroom wall, you must find the solution to the problem. The leak caused by the water pipe leak needs to find the leak point of the pipe. If it is the waterproof layer, you must find the leak location of the waterproof layer to repair the waterproof layer. .
Plumbing Leakage: If it is a leak in the water pipe, you need to plan to open the wall tile, then find the joint part of the pipe, check whether the leaking pipe is leaking, replace the pipe or interface after finding the leak point, and finally laying a good wall, re-waterproof, Restore the tile surface.
Waterproof layer leakage: If the waterproof layer leaks, you need to shovel off the surface of the tile, find the gap between the tiles, use a waterproof plugging treasure to wipe, and then brush the waterproof coating on the wall. If it is because of the lack of waterproof height caused by water leakage, need to re-plank the tiles in the height, re-waterproof the wall of the height, and then tile the tiles.
Leaking water on the ground to find solutions
In addition to leakage on the wall surface, leakage on the ground is also a common occurrence. Although water leakage from the case will not directly affect the home, it will have a great impact on the residents downstairs. It will inevitably affect the relations between neighbors. Yes, it needs to be dealt with promptly.
Judgment of leaks: First of all, it is necessary to determine the main reason for leakage on the ground. In the bathroom, close the water test, put the water to a height of 3cm, and check whether the floor of the downstairs occupants is leaking in the closed water process. If the water leakage is serious, prove it is a waterproof layer. There was a problem; if there was no change after water was shut off, it proved to be a problem with the water pipe.
Water pipe leakage solution: For the safety of the ground pipe, hot and cold water pipe leaks, you should first open the tiles, find the joints of the water pipes, seal the treatment, if it is a crack in the pipe itself, you need to replace the water pipe, after the completion of the pipe to re-dark Buried, repaired within the waterproof layer, restore floor tiles.
Waterproof layer leakage solution: If there is a problem with the waterproof layer on the ground, you need to shovel off the floor tiles, find the waterproof layer that has problems, and then seal with a plugging treasure or water stop, and then waterproof construction, if the leak point near the wall Body, you need to shovel out the facade of the tiles together, the waterproof layer should also be done on the wall, after the completion of the closed water test, reasonable and then re-laying tiles.
Waterproofing of the bathroom space has always been a long-standing problem for home improvement construction. Whether it is because of problems with the water pipes or the waterproof layer, it is difficult to find leaks. Many households are often too lazy to deal with the wall structures and tiles. For leaking, we must first find out the reason why it is the cause of the water pipe or the waterproof layer and then remedy the problem.
9.0mm WPC Vinyl Flooring Combines the Stability of Natural Wood with the Flexibility of Vinyl. It is designed to offer better foot feels with more stable quality. Dura is ideal for every room in the house - including kitchens, basement, and even full bathrooms, because it is 100% waterproofs.
As an added benefit, it may be installed on existing hard surfaces such as ceramic tile, hardwood, laminate, and even imperfect subfloors.
9.0 MM WPC Vinyl Flooring,Vinyl Flooring Planks,Vinyl Sheet Flooring,Luxury Vinyl Flooring
GreenOmni Surface Co., Ltd , https://www.greenomnifloors.com