>>> 6 square meters mini kitchen decoration has a coup
Although the overall design of the kitchen is becoming more sophisticated and functional, it is almost perfect, but you still need to carefully grasp it, otherwise you may still have problems. Want to make our kitchen closer to perfection? Then hurry to take a look at the designer for your analysis and three mistakes.
One mistake: Can't see it in the hood
The question reflects: I am a full-time housewife. When the new home is renovated, the kitchen is the most troublesome thing for me. My home kitchen is an imported brand, with a beautiful appearance and complete functions. The only regret was the choice of a thin flat cooker hood. What was fancy was its appearance, but now it is found that its smoking ability is too weak. For a meal, the taste in the kitchen is so great that it can't be dispersed for a long time. Wanting to change the range hood is too much trouble, not changing and can not solve the problem of smoke, I am very distressed.
Designer: When the whole kitchen of the imported brand appeared in the market, the appearance of the range hood and the harmonious design of the whole kitchen made people shine. Indeed, the flat body design is simple and stylish. Although the price is high, it is still very popular in the market. However, it is not suitable for Chinese cooking, frying, cooking, frying cooking, because the collection hood is too shallow or there is no set hood, too late to spill out of fumes spread. Over time, greasy will adhere to the cabinet or wall. Kitchen hygiene becomes another headache for you.
To solve this problem, it is recommended that you change the dark hood type hood. This type of model includes deep or deep cabinet type, all set deeper (larger volume) hoods. When the fan is running at a high speed, a certain negative pressure zone is formed above the fume hood, which is used to absorb fumes that are too late to be pumped out, and acts as a buffer, thereby eliminating the phenomenon of spillover of a large number of fumes.
Second mistake: The layout of the operation area is irrational
The problem was reflected in the fact that the distance between the kitchen sink and the side wall of my kitchen was less than 10 cm, and it was next to the stove. There was almost no place for the operation of the cutting board. To cook a dish, wash the dish on the right side of the cooktop, and then chop the dish to the left of the cooktop, back and forth, especially uncomfortable. Originally, the house's water pipes and gas pipes were lining up together. When the cabinet companies designed them, they installed stoves and sinks directly on the nearby pipelines to save trouble. I really regret that I didn't think about these details at the beginning, causing an awkward situation now.
Designer: There are many readers who have reflected to us the troubles of Ms. Wu. However, if you want to fundamentally solve this problem, you may have to change the channels and change the table.
Renovation of the kitchen must emphasize practicality. Not only should reasonable arrangements be made for the operating area in conjunction with the operating procedures, but also the height of the countertop, the height and thickness of the cabinet, and the brightness of the lights should be adjusted according to the specific needs of the owner. The opinion of the "head chef" at home is very important. After considering the whole matter as much as possible, it will be further discussed with the cabinet designer.
Our designers are designed to achieve their own ideas, but to really feel the convenience of the operation, more is the need to combine the owner's personal experience and life experience.
Three mistakes: impractical pine wood countertops
The problem is reflected in: During the renovation, in order to pursue my favorite rural style, the cabinets are designed to be open-style. There is no cabinet door, and the coarse burlap curtain is used for sheltering. The countertops of the cabinets also give up the finished tabletops and the rustic ones are selected. Pine boards are made to be spliced ​​and installed by the workers at the site. Finally, waterproof paint is applied to the countertops. I thought that waterproofing should be no problem, but it may be because pine wood is a solid wood material, it will inevitably have water, shrink gradually after dehydration, leading to more and more cracks in the place where the table board is handed over, and the glue will not help, and when the table has When water accumulates, the water seeps into the cabinet. Now I can only change the table to solve the problem.
Designer: It seems that Mr. Zhang is indeed too idealistic. The countertops of the pine boards look very cool, but after all, the kitchen countertops are the places where the most contact with water, and the wood is a material that is easy to absorb water, so the cracking deformation is a matter of time. Now that the design style of the country style is positive, so the materials of this style in the building materials market will become more and more complete. You can choose suitable materials instead of solid wood. The practicality and beauty in decoration are always a contradiction, but as long as you choose the right material, this contradiction can be balanced!
Kitchen Range Hood Decoration Design Style Decoration Paint Kitchen Decoration Kitchen Kitchen Price Decoration Style Home Furnishing Country Style Kitchen Cabinet Cupboard Door Cabinet Door Kitchen Cabinet Door
Flap Disc Backing Pad Specification:
Material: High Purity Fiberglass Cloth with Phenolic Resin
Surface: Black Paper, OEM Label
Type: T27, T28, T29.
Size: 75mm, 85mm, 90mm, 95mm, 107mm, 117mm, 140mm, 220mm
Layers: Normally it ranges from 6-12 layers, or as customers` requirements.
1. Our Flap Disc backing pad uses stamping method, makes our fiberglass backing pad size more accurate and concentricity better
2. The flap disc backing Inspect all products, to maximize the rate of standard product
3. The fiberglass backing pad is thicker, which is beneficial to increase the synchronous consumption of the flap disc
4. The fiberglass backing pad has more micro space to make the resin deeper import, and the Sanding Belt is easier to fit on the fiberglass backing pad
5. This Nylon fiber backing pad use dense glass fiber mesh cloth, the surface of the fiberglass backing pad is more smooth and beautiful than similar products
The Fiberglass backing pad is Suitable for: Abrasive Flap Disc , Clean And Strip Disc , nylon fllap wheels,
The related abrasive products we can supply is Flap Disc Adhesive , Bonded Abrasives , and Buffing And Polishing products, such as Cotton Buffing Wheels and Sanding Sponge , if you have any needs about abrasive tools, please kindly feel free to contact us.
Packaging Details for Fiberglass backing plate:
1. 20-50pcs wrapped with polyethylene film,
2. 250-1000pcs into boxes or cartons
3. 20-40 cartons are packaged on one pallet.
4. Usually about 250 000-350 000pcs per 20" conainer,
about 400 000-650 000pcs per 40" conainer.
about 1 000 000 pcs per railway wagon.
Fiberglass Backing Pad,Fiber Glass Backing,fiberglass back pad for flap disc,Flap Wheel Backing Pad,fiber glass back pad
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com