Three major protection measures are available to choose from in the beginning of anti-theft security products

Near the end of the year, and when thieves are rampant, home burglary has gradually become a problem that attracts people's attention. It is reported that in the security industry, the effectiveness of physical protection is quite limited. Through various legal programs, we can understand that the current burglary techniques are very clever. I do n’t know whether it is the quality of the anti-theft door or the thief ’s technology is too superb. Under such circumstances, the owner can choose and install some more secure security facilities through online comparison selection, consulting professionals, etc. according to his own situation. The following introduces three options for home security protection. product.

1. Electronic fence and fence

The electronic fence or electronic fence is a product installed on the courtyard fence or fence. From the perspective of physical protection, the installation of the electronic fence strengthens the height of the courtyard wall and effectively prevents thieves from entering the home by climbing the fence. From a technical prevention point of view, the current electronic fence adopts two adjacent beam interception detection detection, through multi-LED infrared beam mutual radiation, once an interruption occurs, it will immediately send an alarm signal to the host.

The electronic fence is more compact than the electronic fence, and the detection distance is relatively short, but the sensing speed of these two devices can be adjusted, which is suitable for more fields or to deal with different climates and weather. The electronic fence has a built-in mutual radiation infrared grating, which combines lighting and anti-theft. The concealed defense is safer. Under normal circumstances, villas, courtyards, etc. are suitable for installation of such equipment to strengthen safety protection.

2. Monitoring Alarm

Indoor surveillance anti-theft alarm system is also the choice of many people. The most common indoor alarm equipment accessories include door and window magnets, infrared detectors, etc. These devices can be connected to the alarm host. The alarm host can be divided into two types. One is based on a telephone alarm host, which is used in conjunction with door sensors and detectors to rely on wireless sensor technology to achieve alarms. Telephone lines or GSM communications send alarm information to the household head. The effective detection distance of the home infrared detector is 5-10 meters, and the intelligent detector will determine whether it is an illegal intruder or a pet at home, so as to avoid frequent false alarms.

The other is an independent alarm, such as a smoke detector, carbon monoxide detector, etc., once the concentration is detected to be too large, it will immediately emit a beeping beep. These are installed on the kitchen or heating, and can give effective alarm feedback to the head of household at the first time. For the elderly and children at home, this type of alarm system can effectively avoid the corresponding danger.

3. Surveillance camera

Installing a surveillance camera at home is also a new method of anti-theft. In addition, some children install a remote-controllable surveillance camera at home for the safety of the elderly and children. There are two main types of high-definition surveillance cameras installed at home, one is based on analog surveillance solutions, and the other is based on IP network solutions, according to different surveillance needs to choose different surveillance modes.

Among them, the analog system should be selected for multi-point monitoring. The cost of the monitoring probe is low, and the multi-channel simultaneous monitoring can be realized according to the selected DVR, but it needs an extra budget to connect the alarm product. Most home network surveillance cameras integrate functions such as recording, alarming, voice dialogue, and video storage. They are all-in-one devices in home monitoring, and are currently the products targeted by major network manufacturers, telecom operators, or IT manufacturers.

Cutting Wheel

Diamond cutting piece is a widely used in stone, concrete, precast board, new and old roads, ceramics and other hard brittle materials processing.

Diamond cutting pieces are mainly composed of two parts; Matrix and cutter head,

The matrix is the main support part of the bonding tool head, and the tool head is the cutting part in the process of use.

The tool head will be constantly consumed in use, while the matrix will not. The reason why the tool head can play a cutting role is that it contains diamond. Diamond, as the hardest material at present, cuts the processed object by friction in the tool head, while diamond particles are wrapped in metal inside the tool head.

According to the shape of the knife head, there are different effects:

1. Continuous edge Saw Blade: continuous saw diamond cutting blade, generally made by sintering method, water must be added when cutting to ensure the cutting effect, and the type of gap will be cut by laser.

2, knife head cutting piece: serrated disconnect, cutting speed, suitable for dry and wet cutting methods.

3, corrugated cutting piece: combined with the advantages of the first 1, 2, serrated continuous corrugated uniform convex and concave, improve the cutting speed, increase the service life.


Cutting Wheel,Diamond Disk Marble,10 Cut Off Wheel,Aluminum Oxide Cutting Wheel

Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com

Posted on