Distribution boxes are classified according to their structural characteristics and uses:
(1) Fixed panel switchgear, often called switchboard or power distribution panel. It is an open switchgear with panel covering, the front side has protective effect, the back and side can still touch the live part, the protection level is low, and can only be used for industrial and mining enterprises with low power supply continuity and reliability requirements. The transformer room is used for centralized power supply.
(2) Protective (ie closed) switchgear, which refers to a low-voltage switchgear that is enclosed except for the mounting surface. Electrical components such as switches, protection and monitoring controls of such cabinets are mounted in a closed enclosure made of steel or insulating material, mounted on a reliable wall or off the wall. There may be no isolation between each circuit in the cabinet, or it may be isolated by a grounded metal plate or insulating plate. Usually the door is mechanically interlocked with the main switch operation.
There is also a protective table type switchgear (ie console) with controls, measurements, signals and other electrical appliances. The protective switchgear is mainly used as a power distribution unit at the process site.
(3) Drawer type switchgear. This type of switchgear is made of steel plate and closed, and the electrical components of the inlet and outlet circuits are installed in drawers that can be extracted to form a functional unit that can perform certain types of power supply tasks. Between the functional unit and the busbar or cable, it is separated by a grounded metal plate or a functional board made of plastic to form three areas of busbar, functional unit and cable.
There are also isolation measures between each functional unit. Drawer type switchgear has high reliability, safety and interchangeability. It is a relatively advanced switchgear. Most of the switchgears currently produced are drawer type switchgear. They are suitable for industrial and mining enterprises and high-rise buildings that require high reliability of power supply as a centralized control distribution center.
(4) Power and lighting distribution control box. Mostly closed vertical installation. The degree of protection of the enclosure varies depending on the application. They are mainly used as power distribution devices at the production sites of industrial and mining enterprises.
Advantage:
1. Energy-saving
It can be used together with temperature controller to form infrared radiant heating system. According to the temperature needs of the user, the temperature in each room can be freely adjusted. When the indoor temperature reaches the preset temperature, the heating system will automatically stop and the heat accumulator begins to emit heat so as to maintain the preset temperature for a long time, saving energy and power.
2. Environmenal protection
Its energy is electricity so that is very evironmental.
3. Safety and comfortable
It won't explode or emit odor, wind or noist.
4. Long life expectancy
It can be used more than 20 years.
5. Health care
The heat radiant can change body microcirculation, cell organization under skin producing resonance, clearing the barrier of microcirculation, adjusting and balancing nervous system promoting metabolism, increasing body physical power. It is very good for your health.
Ceiling Mounted Infrared Heater
Ceiling Mounted Infrared Heater,Ceiling Panel Heater,Ceiling Mounted Electric Heater,Ceiling Mounted Room Heater
Shandong Dexiang Electrical Technology Co.,Ltd , http://www.elephant-heater.com