DYWPX2 variable frequency pump installation requirements are there?

[Asia pump network hearing] variable frequency constant pressure pump installed as required to ensure its normal operation. Next, Xiao Bian and everyone introduced DYWPX2 variable frequency pump installation requirements are there? DYWPX2 variable frequency constant pressure pump First, the installation of environmental requirements 1. Ambient temperature: 0 ℃ -45 ℃ cut communication is good, below zero, please do a good job pump insulation insulation. 2. No water droplets, steam, no floating dust and metal particles place. 3. No sun exposure, high temperature and serious dust places. 4. Non-corrosive, flammable gas and liquid place. 5. No vibration and no electromagnetic noise interference sites. 6. Maintenance and inspection of the site easy Second, the installation precautions 1. Pump installation to avoid foreign matter into the pump or pipe (such as PVC glue, raw material with tape so as to prevent the check valve and other components blocking). 2. Wiring, wire diameter specifications in accordance with the provisions of electrical regulations, please do grounding in order to ensure safety. 3. The device has been tested before leaving the steering, so there is no phase sequence input power RST, can be any connection. 4. Please check whether the power supply is consistent with the power supply before connecting the power supply. 5. Piping should pay attention to the inlet Recommended installation of flexible fittings import and export diameter, not less than the pump inlet and outlet diameter, piping can be large and small. 6. Import and export to install the valve easy access disassembly, the import side recommends the installation of Y-type filter to prevent foreign matter in the water tank into the pump. 7. After the installation is finished, please pay attention to the exhaust of pump body. 8. Please keep the diaphragm pressure tank air pressure. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)

T300 Joint Wrap Tape tape series is designed for corrosion protection of straight pipes, fittings, flanges valves,

bends, elbows, carbon steel pipes and other irregular configurations.
Joint wrap tape be made of a stabilized PVC carrier film, coated on one sides with a permanently plastic
synthetic compound on Butyl rubber compound bitumen base.



Description

Pipe Wrap Tape is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Pipe coating tape will protect the pipe and its anti-corrosion tape surface from pipeline damages. Xunda high quality pipe wrap tape coating tapes have been specially developed for high-quality, corrosion protection for joints, in cases where the pipeline has already been installed. The material is easy, safe and quick to apply on welded joints, bends and other complicated shapes.

Usage

l Provides long-term anticorrosion to steel pipelines.

l Repair of damaged factory applied corrosion protection and anticorrosion to pipe surface

l Outlining weld beads and cut backs prior to wrapping bare-welded joints.

l Outlining seams on spiral and seam welded pipe.

Features & Benefits

l Excellent adhesion to a wide range of industries, steel piping.

l Effortlessly applied with no special equipment (mouldable by hand).

l Compatible with common pipe coatings

l Endures extremes of heat and cold.

l Excellent resistance to cathodic disbondment.

l High water and vapour impermeability.

l Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068

Main market

· Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Bengal,Pakistan,

· Uzbekistan,India,Australia,Indonesia,Kazakhstan,

· Ecuador,Venezuela,Bolivia,Argentina,

· Uruguay,Malaysia and so on.

Material:

Polyethylene backing

Butyl rubber adhesive

Payment:

T/T , L/C,Western Union,Money Gram,Cash

MOQ:

500 roll

Shipment port

Qingdao or Shanghai port

Package:

12 rolls,6 rolls,4 rolls

Sample leading time:

about 5 days in the free season,may be 8 days in the busy season.

Delivery time:

10 days after the order confirmed,and it depends on the quantity of the order.

Brands:

OEM or ODM, we can provide as your requirements,

including your design/size/material/weight/Logo/package and so on.

Ordering Information

Tape Coatings are available in roll form.Ordering

Example: T100-20 WHT6X100FT 3``

20




Tape thickness

20 mils (0.508 mm),25 mils (0.635 mm)

WHT

Tape color

Black (BLK), White (WHI), Blue (BLU),GREEN(GRN)

6

Tape width

1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm),

200FT

Tape roll length

100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m)

3

Tape core diameter

1.5" (38 mm), 3" (75 mm)


112




pipeline Joint Tape

Self Adhesive Tape, Joint Coating Tape, Welding Wrapping Tape, Field Joint Tape

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com

Posted on