How to properly use the deep-free soil conditioner

Deep-plow soil conditioner is a biochemical agent that can break soil compaction, loose soil, improve soil permeability, promote soil microbial activity, and enhance soil fertility. It is suitable for improving various types of soil and saline-alkali land. Because it looses the depth of the soil to 80-120 cm below the surface, it can truly achieve deep ploughing, and can increase fertilizer utilization by more than 50%. It is water-saving and fertilizer-efficient, environmentally friendly and efficient, so it is well received by farmers. However, many farmers do not understand the principle of loose soil for deep soil conditioning agents. Therefore, the concentration and frequency of spraying on different soil types are often inaccurate, resulting in serious waste of chemicals. In order to avoid such a situation, the principle of its loose soil and the problems that should be paid attention to during the application are as follows.

Different types of soils contain a certain amount of colloidal material with a strong negative charge that attracts positively charged hydrogen ions in the soil and water, thereby trapping water (hydroxide) and preventing moisture from penetrating deep into the soil. Long-term etch deposition, combined with the large use of chemical fertilizers over the years, has led to an increase in nitrate concentrations in the soil, which has resulted in different degrees of consolidation of the soil. The deep-free soil conditioner contains a biologically active substance, which is a multivalent anionic active agent, which acts on the soil vertically by moisture to activate its active constituents, frees the hydrogen ions adsorbed by the soil, and increases the amount of soil cation exchange. The soil forms more pores, improves soil aggregate structure, and enhances soil permeability and fertilizer penetration. Thereby achieving the purpose of loosening the soil.

For black soil, sandy loam soil and various no-tillage and less ploughing land, the annual surface should be sprayed with 200 grams of water per 100 mu for 1-2 times in spring, summer and autumn; yellow earth, red soil, brown soil and other sticky Large, hard clods, severe knots, uneven distribution of water and fertilizer, and shallow soil layers should be sprayed twice a year in spring, summer and autumn, with 300-400 grams per acre of 100 kg of water; The standard use is a soil improvement process, and the amount and frequency of application are reduced year by year until not applied.

It should be pointed out that the soil-free soil conditioning must be used under the premise that the soil is sufficiently moist, because water is its active carrier and cannot be activated without water. After spraying, the soil should also be kept moist, so that its active ingredients are often active and speed up the loosening of the soil. Of course, if the drought is dry, there is no need to worry about the failure of the medicament, because it is a biochemical preparation, and once the water is activated in the soil, it can exert a loosening effect on the soil.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

LED FLOOD LIGHT

LED STREET LIGHT

solar street light

led flood light

solar flood light

highbay light

grow light

Outdoor Led Flood Light,Led Outdoor Flood Light,Stadium Led Flood Light,Modular Outdoor Flood Lights

zhongshanshi huadengxing lighting co., ltd , https://www.ledhdx.com

Posted on