Cotton should be re-applied with organic fertilizer

In view of the current problems in the application of organic fertilizers on cotton fertilization, the high use of nitrogen fertilizer, the excessive use of nitrogen fertilizer in the early stage, the general lack of fertilizer in the later period, and the lack of attention to zinc fertilizer application in zinc-deficient boron soil, the following scientific fertilization methods are adopted: The combination of organic fertilizer and inorganic fertilizer; control the total amount of nitrogen fertilizer, adjust the proportion of base and topdressing, reduce the amount of nitrogen fertilizer in the early stage, and implement the shift of nitrogen fertilizer; the long-term constant monitoring of phosphorus and potassium fertilizer, the lack of supplements in the trace elements. According to the sowing method, the deep application of the base fertilizer is carried out by means of strip application and hole application. Immediately after application, a layer of soil is planted and then planted. The depth of the cover soil needs to be above 6.7 cm; the application of the top dressing or the hole should also cover the soil. More than 6.7 cm; apply boron fertilizer to the soil with boron deficiency.

First, the application rate of organic fertilizer: about 4000 kg per mu.

Second, the application rate of nitrogen, phosphorus and potassium: per mu yield of lint yield is less than 100 kg, 16 kg of nitrogen fertilizer, 7 kg of phosphate fertilizer, 12 kg of potassium fertilizer; the yield per mu of lint is 100-150 kg, and the application of nitrogen fertilizer is 15 kg. 6 kg of phosphate fertilizer and 11 kg of potash fertilizer; the yield per mu of lint is more than 150 kg, 14 kg of nitrogen fertilizer, 5.5 kg of phosphate fertilizer and 10 kg of potassium fertilizer.

Third, the amount of boron fertilizer application: for the boron-deficient soil, 1 kg of boron fertilizer per acre.

In the proportion of fertilization, base fertilizer: 2000 kg of organic fertilizer, 30% of total nitrogen and potassium fertilizer, and 60% of total phosphorus fertilizer; flower bell fertilizer: 1000 kg of organic fertilizer per mu, 20 of total nitrogen, phosphorus and potassium fertilizer %; top top fertilizer: 1000 kg of organic fertilizer per mu, 50% of total nitrogen and potassium fertilizer and 20% of total phosphate fertilizer.
Article source: Hunan Science and Technology News
Total 1 | <First <Prev 1 Next> Last> |
share to:

Hex Bolt

Hexagon Bolt refers to the fastener composed of head and screw. According to the material, the bolt can be divided into iron bolt and stainless steel bolt, namely hexagon head bolt (partial thread) - C grade and hexagon head bolt (full thread) - C grade.

1. According to the stress mode of the connection, there are common and reamed holes. The bolts used for reaming holes should match the size of the holes and be used when subjected to transverse force

2. According to the head shape, there are hexagon head, round head, square head, countersunk head and so on. Generally, countersunk head is used in the place where the surface is smooth and no protrusion is required after connection, because countersunk head can be screwed into parts. Round head can also be screwed into parts. The tightening force of square head can be larger, but the size is large. Hexagon head is the most commonly used.

In addition, in order to meet the needs of locking after installation, there are holes in the head and in the rod, which can prevent the bolts from loosening when they are subject to vibration.

Some bolts have no thread of smooth rod to do thin, called thin waist bolt. This kind of bolt is conducive to variable force connection.

There are special high strength bolts on the steel structure. The head will be bigger. The size will also change.

In addition, there are special uses: T-shaped slot bolts, most of which are used in machine tool fixtures, with special shape, and both sides of the head need to be cut off. Anchor bolts are used to connect the machine and the ground, and there are many shapes, such as U-shaped bolts, and so on.

There are also special studs for welding, one with thread and the other without thread, which can be welded on the parts, and the other side can directly screw the nut.

Hex Bolt,Hex Bolts Cnc,Din933 Black Hex Bolts,Hex Bolts Head Screw With Dog Point

Suzhou Gubao Screws Co.,Ltd. , https://www.hongyiscrew.com

Posted on