In the series cooling system, the cooling water first enters the intercooler, then flows through the first and second stage cylinders in sequence, and finally flows through the aftercooler and then discharges. The system features: simple structure, high water temperature rise, and low water consumption. The disadvantage is that it is inconvenient to check when a fault occurs. This is a common form of two-stage compressor. Air compressor cooling system classification
Sort by cooling water through cylinder and intercooler
1. Tandem cooling system
In the series cooling system, the cooling water first enters the intercooler, then flows through the first and second stage cylinders in sequence, and finally flows through the aftercooler and then discharges.
The system features: simple structure, high water temperature rise, and low water consumption. The disadvantage is that it is inconvenient to check when a fault occurs. This is a common form of two-stage compressor.
2. Parallel cooling system
Cooling water flows from the main inlet pipe to the cylinders and intercoolers of each stage, and then flows into the total drainage funnel.
The water volume of this system can be adjusted separately, the cooling effect is good, and the fault finding is convenient, but the system pipeline is more complicated, and the water consumption is higher than the series type.
Thank you for your visit, hope that the information we provide is useful to you, and look forward to working with you.
Service Hotline
support hotline
For more information on air compressors, please pay attention to http://
Http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
General Use Strain Gauges,Eb Load Cell Transducer,Full Bridge Strain Gauge,For Compression Sensor
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com