I believe that everyone has heard of non-slip insoles, widely used in car slip, of course, not only this use, but also can be used as car mats and mobile phone mats. The use of a long time, anti-skid insoles will naturally become dirty, then how to clean anti-slip mat ? Then follow Xiaobian to see how non-slip mats can be cleaned and what kind of materials the car antiskid insole can buy.
First, how to clean non-slip mat
1. The non-slip foot pad of ordinary PU material is very easy to clean compared with other foot pads. It only needs to be washed with water when washing the car, so that the non-slip foot pad of this material can be cleaned.
2, if you use non-slip mat is a carpet material, the best choice for dry cleaning. The friend who chooses to wash the way must use the cleaning agent that contains alkali, and put the non-slip foot pad into 30 degrees of water to soak, rub gently after using the hand after 10 minutes, wash the foot pad and spread in the air vent after drying That's it.
3, leather non-slip floor mat cleaning method is actually similar to the leather coat we wear, if not very dirty we do not have to use water to clean, just use a wet rag to wipe the stain can be clean, you can also wipe with a wet paper towel. In addition, when you are doing car beauty, you can let the cleaning staff wash the floor mat because the foam used in the car wash can be used to clean the floor mats, and it will not cause any harm to the skin.
Second, the car anti-skid pads to buy what material is good
1, non-slip foot pad to choose to meet the vehicle structure, that is to say when you buy non-slip foot pad, we must pay attention to whether the foot pad tailored to the car's models, not too big nor too small, and car fit Non-slip foot mats work best.
2. The anti-skid pads of the car all have a fixed hole position. Everyone needs to see whether this position is consistent with the original used carpet. The thickness of the second-stage fixing hole should always be the same, otherwise the over-thickness will make the pad unable to be fixed in the car's card. buckle. And when buying a non-slip floor mat, it is best to choose the mat that corresponds to the model, because each car brand has different models in each car size.
3〠Anti-skid pads on the back of the car are all covered with non-slip particles. It is recommended that you choose a soft pad that is made of anti-slip material. This pad can increase the friction with the rubber. If the anti-slip particles are too hard, it will reduce the slippage of the pad. effect. At present, the best anti-slip effect is the foot pad made of rubber material. The non-slip particles behind the foot pad are made of rubber and have a non-slip effect.
Xiao Bian summary: The above is how to clean non-slip mats and car anti-skid pads to buy what material is good related content, hoping to provide useful reference for everyone. At present, there are many merchants that produce non-slip mats. Xiaobian recommends several good non-slip mats for everyone here. Asian elephant mats, car tailors and other brands produce non-slip mats that are good and affordable. May wish to find out.
TS Hardware is a China leading company that has engaged in CNC Machining Prototype & Production Services for more than a decade. We`ve helped thousands of clients speed up their projects with our services.
Equipped with leading-edge CNC machines, we have the capability to offer you a reliable One-Stop CNC machining service from design, prototyping, production to surface finishing. Our CNC turning services and CNC milling services offer rapid prototyping/end-use parts production in a wide range of materials, efficient for both time and cost.
Carbon Steel Cnc Part,Carbon Cnc Part,Carbon Cnc Precise Part,Carbon Prototype Parts
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com