In modern decoration, many people will choose to install brilliant crystal lamps or various chandeliers. On the one hand, they can play a good role in decorating. On the other hand, they also improve the quality of the entire home. What are the precautions when installing a pendant? Then follow Xiaobian together to understand it.
| First, the chandelier installation Raiders |
The chandelier is a high-grade decorative lighting used on the indoor ceiling. Its noble and noble styling can highlight the grandeur of the house. The use of a chandelier requires that the house has a sufficient floor height, which must be fixed due to the weight of the chandelier.
Chandelier installation method
1ã€Chandelier fixed
Fix the chandelier first and then draw the drilling point. Use the impact drill to drill the hole and then insert the expansion screw into the hole. It is noteworthy that since the weight of a pendant lamp is generally larger than that of a ceiling lamp, a metal hanging plate or hook is used to fix the ceiling first, and then the base of the pendant lamp is connected, so that the installation of the pendant lamp can be more secure.
2, pendant light connection
Screw on the head screws and the base is installed. Connect the power cord. The exposed part of the copper wire is wrapped with insulating tape. Then connect the boom to the base and adjust the height. Finally, the lampshade of the pendant lamp and the lamp can be installed.
Chandelier Installation Notes
1, pay attention to the chandelier can not be installed too low
The use of a chandelier requires that the house be of sufficient height. The chandelier, whether installed in the living room or in the dining room, cannot be hung too low, so that it does not appear to obstruct people's normal vision or feel dazzling. Generally, the height of the derrick can be adjusted. If the house is low, using a ceiling light will make the house more bright and generous.
2, pay attention to the chassis fixed and secure
The basic requirement for lighting installation must be firm. When installing various types of lamps, install them according to the requirements of the lamp installation instructions. If the weight of the luminaire is greater than 3kg, a pre-embedded hook should be used or the roof hanger should be directly fixed with an expansion bolt.
3, check the boom is firmly connected
Generally, the suspender of a pendant lamp has a certain length of thread and can be used for adjusting the height of the hanger. In addition to careful inspection of the installation of the chassis after the installation is solid, sling suspended below the light box, should pay attention to the reliability of the connection.
Lighting chandelier lamps and lanterns to install living room lighting
Rx Ring Joint Gasket,Rx Ring Gasket,Rx And Bx Ring Gasket,Rx Ring Joint Gaskets
WENZHOU JINGWEI SEAL TECHNOLOGY CO., LTD , https://www.ringjoint-gasket.com