Customized wardrobe installation seems to be a complicated process. Only after you understand the specific installation steps and methods, you will feel that the custom wardrobe installation is not as difficult as imagined. Custom wardrobes need to be tailored to achieve twice the result with half the effort.
First, the preparation stage
1 expected to arrive
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware (hardware decoration renderings).
2 fixing screws
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3 cutting side panels
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
Second, the installation phase
1 put the bottom plate
The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
2 fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
3 installation top plate
It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
4 mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5 fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6 installation of clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Fluorescent Brightener BA
C. I. 113 CAS: 12768-92-2
Molecular formula: C40H42N12O10S2Na2
Molecular weight: 960.94 (as international relative atom mass 2005)
Max UV absorption wavelenghth: 348nm
brilliant blue purple. Soluble in water. In neutral or alkaline dyeing bath dyed cotton with the staining, especially suitable for peroxide bleaching solution in use; Also used to discharge. Can be used for cotton, wool, silk, nylon as well.
Application:
Mainly applied to whiten paper pulp, surface sizing, coating, and also applied to whiten cotton, linen and cellulose fiber as well as cellulose fabrics, and to brighten light-colored cellulose fabrics.
Optical Brightener BA,Fluorescent Brightener OBA,Optical Brighteing Agent BA,Fluorescent Whitening Agent BA
FORING IMPORT & EXPORT CO.,LTD , https://www.foringfor.cn