Method for increasing the service life of sawdust dryer

Some users called us every three or five times to say that the equipment was out of order, but there were also many users who bought the sawdust dryer and returned it. After several years of use, there was no fault. Is this because the quality of the equipment is different? Some users called us every three or five times to say that the equipment was out of order, but there were also many users who bought the sawdust dryer and returned it. After several years of use, there was no fault. Is this because the quality of the equipment is different? No, this is related to the method of using the sawdust dryer equipment. If the equipment can be used correctly, the equipment will naturally not be prone to failure and the service life will be longer; if it is not operated according to regulations, It is very easy to make the equipment malfunction, then the equipment will naturally be scrapped early. Today, the dryer manufacturer will give you a way to increase the service life of the sawdust dryer, so that users are no longer troubled by equipment failure.

Rongrong mechanical experts analyzed according to years of experience, the most prone to failure is the start of the dryer, the inspection work before starting must be done, check whether there is a large amount of slag in the furnace, whether the feeding device and the power device are installed properly, Whether it is necessary to add lubricating oil or the like on the transfer shaft, and all the inspections are completed before starting the production. In addition, the operator should regularly maintain the sawdust dryer to ensure that each accessory is in a safe and healthy state each time the equipment is in operation.

During the use of the sawdust dryer, the operator must be careful, even if it is a small problem, it must be resolved in time, so that the equipment failure rate can be reduced, in order to increase the service life of the sawdust dryer.




Source of this article: http://

l
contact number
Http://news.chinawj.com.cn Method for increasing the service life of sawdust dryer Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn Method for increasing the service life of sawdust dryer

Automatic swing doors are distinguished from Automatic Sliding Doors. Automatic swing doors don't have door operators, but door openers and door closers are installed on the door leafs with radars or infrared sensors to control the door's open and close. Ningbo GDoor Automatic Door company selects Geze door openers and international well-known door closer brand. Ningbo GDoor automatic swing doors can connect with infrared sensors, various switches and remote controllers, matching up with access control system, which can implement advanced management function.

Automatic Swing Door Operator

Automatic Door Operators,Swing Door Operator,Power Door Operators,Electric Door Operator

Ningbo Gdoor System Control Technology Co., Ltd. , http://www.gdoor-cn.com

Posted on