When the weather is hot, we can easily find that some knitted fabrics such as clothing and towels often have some black mildew spots, and there is also a musty smell. But many people say that daily cleaning is also done in place, is it because of long-term moisture?
At this time, some people raised doubts. The mildew condition of the knitwear can be understood. Why is there a similar situation in the wooden floor of our house? The floor starts to turn black and it is similar to mold. What is the cause?
China's top ten brand network selection expert experts answer: wood floor blackening is essentially an aging, the main forming factor is that the wood floor in the process of use, after years or not pay attention to the floor maintenance, the wood floor moisture content is high As a result, a large amount of mold is accumulated, and the wooden floor becomes dark over time. Blackening of the wooden floor will eventually cause corrosion, so when you find that the floor in your home is getting dark, you must pay attention to it.
Since the blackening of the wooden floor is a common and bad phenomenon, how is it caused, as a user of the wooden floor, can you find some measures to avoid it from these reasons?
In essence, the blackening of the wooden floor is caused by the high moisture content of the floor itself. Jiuzheng Building Materials Network learned that if such a situation occurs in the early stage of the completion of the laying, it must be a quality problem of the wooden floor. At this time, it should contact the dealer in time and ask him to give repair or replacement treatment.
In another case, the blackening of the wooden floor that appeared after a period of use was the most troublesome. Because there may be leaks or water seepage in the living room, blackening the floor is a signal that reminds us that there are some floors in the house that generate a lot of moisture due to water leakage.
Of course, the blackening of the wooden floor is also divided into the surface layer and the interior. If it is only blackened on the surface, it only needs to be polished with fine sandpaper, which is to clean up the blackened areas and mold spots, and then use the floor paint to make up. Qi. If it has penetrated into the interior, it is generally necessary to use a planer, a refurbishment, or even a method of replacing the board to be thoroughly cleaned.
[WeChat public number " Jiuzheng floor network ", pay attention to courtesy, scan code to send millions of business opportunities! Jiuzheng floor network exchange group]
Blister copper (content of 99% copper) was prepared in advance as a thick plate, pure copper flakes as a cathode, with sulfuric acid (H2SO4) and copper sulfate (CuSO4) mixture as electrolyte. After power is applied, copper dissolves from the anode into copper ions (Cu) and moves to the cathode. Upon reaching the cathode, electrons are obtained and pure copper (also called electrolytic copper) precipitates at the cathode. Blister copper impurities in lively copper and zinc with copper will be dissolved as ions (Zn and Fe). Since these ions are more difficult to precipitate than copper ions, electrolysis can be avoided by appropriately adjusting the potential difference during electrolysis. Than the inactive copper impurities such as gold and silver deposition in the bottom of the cell. The copper plate so produced is called "Pure Copper Sheet (T2)" and of high quality and can be used to make electrical products. Sedimented in the bottom of the cell analogy as "anode mud", which is rich in gold and silver, is a very valuable object, remove and then processed with high economic value.
Pure Copper Sheet (T2)
Pure Copper Sheet,Pure Copper Plate,High Pure Copper Sheet,Pure Cathode Copper Sheet
Ningxia Tongji International Trade Co.,Ltd. , https://www.tongjiinternational.com