The reason why the output screen is not displayed:
1. No signal input;
2. The output cable is damaged or exceeds the transmission distance.
Solution:
1. Check the input signal and confirm that the input signal channel is normal;
2. Confirm that the OUT connection is an output device and IN is connected to the input device;
3. Use better quality cables to ensure the stability and high quality of the picture.
The cause of color cast on the screen:
1. The interface is not connected properly. Looseness leads to poor contact.
2. The signal cable is damaged;
3. Display device color adjustment is not correct;
4. Incorrect coloring using software.
Solution:
1. After connecting the connectors, tighten the bolts to prevent loosening due to pulling;
2. Please replace the VGA cable with excellent quality.
3. Refer to the instruction manual of the display device to adjust the color balance of the display device.
4. Re-adjust the color through the control software.
The screen appears jittery or takes a bit
Causes: 1. The cable is too long to cause serious signal loss;
2. The input signal equipment is unstable or the wire is damaged.
Solution:
1. It is recommended to use our signal extender to ensure the minimum line loss;
2. Debug the function definition of the input signal and use good quality wire.
The screen is incomplete on the display device and the black border appears
Causes: 1. Your display device did a back-end cut of the signal;
2. You have adjusted the image's position too much by the control software.
Solution:
1. Follow the instructions for the display device and adjust it to the default settings in the software.
2. Through the control software, re-adjust the position of the image to get the effect you need.
We Manufacture, Exporter & Supplier- Aluminum Reducer
We can manufacture two kinds of Aluminum Reducer Pipe: 6061 Butt-Weld Concentric Reducer (Conc Red) and Eccentric Reducer .
Which are commonly used to change the pipe size or pressure in a piping system.
Aluminum Pipe Reducer,Aluminium Alloy Reducer are made of Aluminum seamless tube within the range of DN 15 – DN500.
Aluminum Reducer Fittings Specifications
Thickness :
3mm-50mm
Outer diameter:
15mm-500mm
Alloy Grade:
1000 series : 1070A,1060,1100,1200
2000 series :2A11,2017,2A12,2024
3000 series :3003 3A21
5000series :5A02,5052,5A03,5A05,5A06,5083,5086,5454
6000 series :6061,6063,6A02,6082,6005
Surface
Mill Finish, Anodized, Powder Coated, Wooden Finish, Polish
Packing
Export standard
Payment Terms
100% irrevocable L/C at sight or 30% T/T in advance as deposit,70% balance before shipment
MOQ
1 Piece
Delivery time
20-45 days after receiving L/C or deposit
Loading Port
Xingang Port,Tianjin
Aluminum Reducer
Aluminum Reducer,Aluminum Reducer Pipe,Aluminum Pipe Reducer,Aluminium Alloy Reducer,Aluminum Eccentric Reducer,Aluminum 1060 Concentric Reducer,Aluminum 6063 Concentric Reducer
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com