The electronic fence is a perimeter anti-theft alarm device that is "blocking mainly, and supplemented by alarms." The fence is equipped with non-lethal high-voltage pulses. It has a triple function of deterrence, blocking, and alarm. Overcoming the fatal shortcomings of the AC grid, compared with the traditional infrared and microwave, it has the advantages of low false alarm rate, free from terrain and environment constraints.
The electronic fence detector is composed of a zone controller and the front end of an electronic fence. The front of the electronic fence is installed on the existing wall or fence of the perimeter, and can also be installed on the floor to form a high-voltage cable isolation barrier. When a wrongdoer attempts to cross over or cut off the electronic cable, the zone controller hits the intruder with a high-voltage pulse of safe energy and sends an alarm signal at the same time. Electronic fence systems can be linked to video surveillance systems, broadcast systems and lighting systems to form an integrated perimeter security system.
Safety Precautions
1. Do not install the electronic perimeter fence system during lightning.
2. Do not place the main controller directly in a damp place.
3. Never touch any part of the system unless the electronic perimeter system has released the pulsed high voltage.
4. Prior to installation and use of this equipment, the staff should do a good job in safety education and corresponding technical training.
5. When the equipment is powered on, there are tens of thousands volts of high voltage inside. The output of the equipment and the electronic perimeter fence wire have a pulsed high voltage signal of less than 10KV. Clear warning signs should be set and safety warning publicity work should be done. Try to avoid electric shock by people touching.
6. The operator of this equipment must have knowledge of electronic and electrical safety and must undergo necessary training to become familiar with the correct use of this product.
7. Once abnormal situation arises in this equipment, it should be cut off the power first, and the cabinet shall not be opened without authorization so as to prevent the fault from expanding. Please contact the company's after-sales service department and follow the specified warranty.
The electronic fence detector is composed of a zone controller and the front end of an electronic fence. The front of the electronic fence is installed on the existing wall or fence of the perimeter, and can also be installed on the floor to form a high-voltage cable isolation barrier. When a wrongdoer attempts to cross over or cut off the electronic cable, the zone controller hits the intruder with a high-voltage pulse of safe energy and sends an alarm signal at the same time. Electronic fence systems can be linked to video surveillance systems, broadcast systems and lighting systems to form an integrated perimeter security system.
Safety Precautions
1. Do not install the electronic perimeter fence system during lightning.
2. Do not place the main controller directly in a damp place.
3. Never touch any part of the system unless the electronic perimeter system has released the pulsed high voltage.
4. Prior to installation and use of this equipment, the staff should do a good job in safety education and corresponding technical training.
5. When the equipment is powered on, there are tens of thousands volts of high voltage inside. The output of the equipment and the electronic perimeter fence wire have a pulsed high voltage signal of less than 10KV. Clear warning signs should be set and safety warning publicity work should be done. Try to avoid electric shock by people touching.
6. The operator of this equipment must have knowledge of electronic and electrical safety and must undergo necessary training to become familiar with the correct use of this product.
7. Once abnormal situation arises in this equipment, it should be cut off the power first, and the cabinet shall not be opened without authorization so as to prevent the fault from expanding. Please contact the company's after-sales service department and follow the specified warranty.
For use in outward opening windows allowing access to window locks and winders.Pet safety enclosure perfect for indoors and outdoors.
1.The multi size: 19x10cm 20cmx30cm, 30cmx40cm suitable for most ordinary family doors.
2.Install Easily: only need to install on the door (suitable position) Completely assembled for immediate use.
3.It's recommended for small pets and it can be moved from one place to another in the House if need.
Pet Door,Aluminum Pet Door,Pet Door For Screen Door,Pet Flap For Screen Door,Porthole screen
Hebei Charlotte Enterprise Co., Ltd. , https://www.cnscreening.com