Everyone knows that the fumes in the kitchen are the enemies of our health. There are many friends who are not willing to go into the kitchen because they are afraid of fumes. The appearance of hoods has solved this problem for many people and become an essential part of the kitchen. But the function of the hood is also closely linked to its quality and installation!
First, check whether the nameplate of the cooker hood corresponds to the product identifier of the outer box. Take out the range hood and the accompanying mounting accessories. The accessories generally include: screws, hanging strips, expanded rubber particles, exhaust pipes, oil cups, and check valves.
Second, before installation, you should first check the performance of the body, place it on the surface of the water platform, connect it to the power supply, and then press each function key in turn. If the light is on, the motor is running normally, and the check valve blade can rotate flexibly. Installation section.
Third, confirm the installation location. The installation environment of range hoods should avoid too many doors and windows, otherwise the air convection will be much, and the effective suction range of range hoods will spread, affecting the use effect. General range hoods should be installed horizontally directly above the cooktop. The height of the hood from the stove should be reasonable, typically 650-700mm. The range hoods with different structure models have different installation positions and sizes, so they should be operated according to the "installation method" in the instruction manual.
Fourth, drill exhaust vents, confirm the position of the exhaust pipe facing the wall, specify the drilling range on the wall, and use the impact drill to drill through the wall. Pay attention to the exhaust pipe out of the door or into the common suction cold flue, the interface should be tight.
Fifth, drill six holes with a diameter of 8 mm and a depth of 50 mm at the corresponding positions on the wall of the installation location. Press the expansion tube into the hole and use 6 5x50 wood screws to fix the hanger.
Sixth, use two smoke pipe clips to fix the exhaust pipe on the air outlet of the check valve.
Seventh, align the hanging hole in the back of the cooker hood with the hook of the hanger, shake the body of the machine, and confirm that the installation is firm. Pay attention to check that the two feet on the back of the machine body do not come off, and the cooker hood after installation and fixing should be connected to the wall. The surface is 90°.
Eighth, according to the adjustable height of the adjustable trim cover, use two M4X10 screws to install and tighten the screw holes in the middle of the hanging plate.
Ninth, install the oil cup and lead the other end of the smoke exhaust pipe to the outside.
Tenth, turn on the power, test whether the range hood can work normally.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Hood
The Xunda Butyl Rubber Pipe Coating is a multilayer system used for the corrosion protection of oil ,gas ,and water underground or aboveground steel pipeline.
l Excellent adhesion to pipe and itself.
l Can be applied over a wide temperature range.
l Good conformability and consistent uniform thickness.
l Easily applied with no special equipment.
l Compatible with common pipe coatings.
l Excellent resistance to cathodic disbondment.
l Meets ASTM D 1000 .EN 12068.AWWA C214.
C209 and other international standard.
Butyl Rubber Pipe Coating
Butyl Rubber Tape,Pipe Coatings,Pipeline Coatings,Butyl Rubber Pipe Coating
Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com