KCG, 2CG type high temperature gear pump purposes: Suitable for conveying solid particles and fibers, the temperature is not higher than 300 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3 m2 / s (5-1500cSt) lubrication Oil or other liquids of a similar nature as lubricating oils. Reduce the pump speed, the viscosity of the transmission medium can be 5 × 104cSt KCG, 2CG-type high temperature gear pump applications: plastic rubber processing industry, textile printing and dyeing industry, paint industry, wood processing industry, food industry, paper printing and other liquid heat carrier Heating carrier heating transmission and other industries. In the oil transfer system can be used as transmission, booster pump; In the fuel system can be used as delivery, pressurization, injection fuel pump; In all industrial areas, can be used for lubricating oil pump. KCG, 2CG-type high temperature gear pump structural features: This series of gear pump gear, shaft, pump, safety valve, shaft seal (special requirements, optional magnetic drive, zero leakage structure) and other components. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved by the use of conveying medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of 1.5 times the pump rated discharge pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be a long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation.
Hi-Stay Trading Co., Ltd. , http://www.szprotection.com