Nowadays, many places, whether it is a commercial building or a residential area, will have elevators. Then friends, you want to know about the elevators. Let’s look at the elevator decoration . The elevator decoration is different from some other places. There are many details to be noted in the elevator decoration, as well as the elevator decoration. The material is also basically fixed. Our elevator decoration needs not only the elevator decoration method, but also the most important one is the use regulations after the elevator decoration.
First, the elevator decoration materials introduction
Elevator decoration generally refers to the decoration of the car, and there is no specified material. As long as the materials that can be used for general decoration can be used in the decoration of the car, the only problem that needs to be considered is the load. If marble decoration is used, the car and counterweight balance factor may be destroyed. The general standard is 40~50%. It is necessary to consider increasing the heavy load. If the weight of the heavy frame is limited, consider using the lead-to-weight block. This increases the cost of renovation.
Second , the elevator decoration use regulations
1. No smoking, spitting, smearing and littering in the elevator. It is forbidden to play in the elevator.
2. It is not allowed to ship flammable or explosive dangerous goods (such as paint, water, asphalt, etc.). In case of special circumstances (requirement for decoration and decoration, and well-packaged, unopened), it is subject to the property company. Approved and taken security measures, and can be shipped with special escort.
3. It is not allowed to open the safety window at the top of the car to ship the items.
4. In the process of loading the elevator, you can only press and hold the door open button. It is strictly forbidden to use the hard object hit button (such as: key, screwdriver, etc.), hit the door panel, and do not lean against the car door or use the article to block the car door. Do not stand in the middle of the door for a long time.
5. The total weight of the goods entering the elevator shall not exceed 400Kg; the height shall not exceed 210cm; the width shall not exceed 130cm.
6, the use of elevators to transport sand, cement, garbage, etc., must be packed with bags, cloth can be placed on the ground of the car, the materials must be placed in balance, to avoid the car tilt, affect the operation, can not overlap stacking. Sand rubbish falls into the car door rail and must be cleaned up immediately.
Third, the elevator decoration method
1. The elevator car decoration adopts four-sided mirror design. It sounds very good. Actually, when you walk into the elevator, you can see a word mess! In fact, there is enough a cosmetic mirror on the back wall, otherwise people can't shape it, and it is a kind of alive pressure.
2, elevator hall door mirror stainless steel. When the elevator is waiting, everyone stands in front of a large mirror and looks at each other. What is the scene! Not to mention the slight distortion of the mirror steel plate becomes a mirror!
3. The elevator shaft is completely transparent. Mainly refers to the sightseeing elevator, now the elevator decoration pays attention to the fashion as the exposure, but what kind of appreciation does the track steel rope have on the heavy black greasy oil? These things are not considered to be displayed to the elevator passengers at the time of manufacture, such elevator More people are prone to visual fatigue, and the layman thinks that the elevator is not finished! The sightseeing elevator only exposes the car and does not affect the passengers' sights.
The detailed method of elevator decoration has been introduced to everyone, and friends should pay more attention to the clear rules of the elevators after the renovation of our elevators. Then, for the elevator decoration knowledge introduced above, friends still want to know. Renovation knowledge, you can continue to pay attention to our decoration home network, thank you for reading this time.
More related wonderful reading:
Yue layer elevator decoration design
Sensor structure:
A lens collects light of a particular color, and a color filter filters light of other colors, projecting one color onto the area
Connection mode of Sensor and substrate:
COB: Module takes the sensor die and connects the sensor to the substrate through the gold wire.
CSP/TSF: Sensor is connected to the substrate and packaged when shipped.
IR Cut and Blue Galss:
The function of IR Cut is to filter out the light frequency invisible to human eyes (reflected back). What human eyes can see is 400~700nm.
Blue Glass absorbs infrared rays, which are not easy to be reflected internally
The Image circle of the Lens needs to cover the sensor's sensitive area
Lens shading:
A condition in which light is unevenly distributed, such as when the center is lit and the outside is dimmed. This is mainly because most of the light is concentrated in the middle, and because different wavelengths of light are imprinted in different places
FOV:
The lens Angle of the module must be the same as that of the lens; otherwise, when the lens Angle is too large, dark Angle may appear.
Blink Sync Module,Thermal Camera Module,Raspberry Pi Noir Camera,Thermal Imaging Module
Tonya Display Limited , https://www.tydisplay.com