Now people don't burn with water, they usually use the store to boil water. For example, our electric kettle is used by people nowadays. This way of boiling water is also faster. You can drink it in two or three minutes. Hot water, but the electric kettle will be faulty for a long time, then what are the methods for repairing the electric kettle ? How to use the electric kettle correctly? The following is a small series of decoration home network to introduce to you.
First, the method of repairing electric kettle
1. Fault phenomenon Turn on the power switch, the heating indicator lights, and the water temperature does not rise.
Analysis and treatment of this fault is a common fault of this type of electric water heater. Generally, the heating wire is blown or the electric heating tube leads to the oxidation and corrosion of the terminal, and the contact with the power supply line is poor and the heating is lost. The multimeter resistance file can be used to measure the resistance at both ends of the heating tube, if the resistance is normal. If the resistance of the two terminals of the electric heating tube is measured to be several thousand ohms or more or infinity, the heating wire in the tube is blown. Need to replace with a new electric heating tube.
2. Failure phenomenon After the water is boiled, it continues to heat up and cannot enter the heat preservation state.
Analysis and treatment of this fault is mostly caused by the temperature of the thermostatic switch loose or off and can not feel the correct temperature. If the thermostat switch is well fixed, the thermostat switch is damaged and its internal contacts are sintered. It is necessary to replace the components with the same specifications.
3. The reason why the boiling time becomes longer
Mainly related to environmental conditions, more scale in the kettle and low voltage. Therefore, in the course of use, the boiling time caused by not having the above three conditions is too long, and generally does not belong to the quality problem of the electric kettle itself.
Second, the use of electric kettle
1. The rated power of the electric kettle is generally large. The capacity of the power plug, socket and power cord should be properly selected. Generally, the 10A specification should be used. If the rated power exceeds 2200W, a larger specification socket should be used. In addition, these sockets should be independent. Use to ensure safety.
2. The plug of the electric kettle usually has a grounding pole and should be connected to a socket with a grounding socket. When in use, the power plug should be fully inserted into the socket.
3. Always keep the power plug, socket, power cord and automatic switch device of the electric kettle dry and clean.
4. The water injection should not exceed the higher water level line to prevent the liquid from overflowing outside the kettle when it boils. The water should not be too small to avoid drying.
5. When using the electric kettle, be careful not to let the child touch the kettle body or touch the power cord to avoid accidents such as burns.
6. When cleaning, the electric kettle should not be immersed in water or rinsed with water to avoid damage to electrical insulation due to moisture, causing malfunction and leakage.
7. Do not repair the electric kettle yourself. In the course of use, if the appliance is damaged and cannot work normally, do not disassemble the casing for repair, and send it to the repair shop or the manufacturer of the product for repair.
Electric kettle is now more common, it has brought us a lot of help, then how to repair the electric kettle and how to use the electric kettle correctly, everyone through the introduction of Xiaobian also understand these issues, then if everyone Also want to know more about decoration information, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
What is the electric kettle power? Electric kettle purchase points
Advantages of heat preservation electric kettle
Household electric kettle background household electric kettle repair steps
Is the electric kettle high in power consumption? What is the electric kettle power?
Electric kettle light is not heated, electric kettle repair method
How about the hemisphere electric kettle? Hemisphere electric kettle introduction
Anping Xinzheng Metal Wire Mesh Co. Ltd produces and sells all kinds of specifications, models and materials of Woven Mesh Products. Our wire mesh products are highly praised by buyers all over the world.
Woven mesh is produced according to the mechanical engineering industry weaves JB/T5979-92 standard, the standard with international standard ISO4783/1990.
Wire mesh mainly adopts plain weave, twill weaving and Dutch weaving
The main material is stainless steel wire(SS 304, SS316, SS316L, SS 302), galvanized wire, black wire and so on
The main features of woven mesh are precise structure, uniform mesh, good corrosion resistance and durability.
Main applications of wire cloth: sifting and filtration in acid and alkali environment, oil industry as mud net, chemical fiber industry as sun filter screen, electroplating industry as pickling net, gas liquid filtration and other media separation.
Woven Mesh Products
Woven Mesh Products,Metal Cloth,Woven Steel Mesh,Stainless Steel Mesh
Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com