What are the wall tiles? How much is a square meter of wall tiles?

When decorating the wall tiles, they will go to the market to find a brand wall brick that is quite famous, and then buy the wall tile that they feel is good. If you have your own craft, stick your own wall tiles. If you are worried that your skills are not enough, look for the plasterer to give the wall tiles. Then let Xiaobian take everyone to look at the relevant introductions about the wonderful contents of the wall tiles .


贴墙砖


First, how much is the wall tile?


The wall tiles are about 40 to 50. It is not difficult to stick wall tiles, and many people are posting them themselves.


Second, the steps to affix the wall tiles


The effect of wall tile paving is largely affected by the construction. In addition to the traditional construction method, Weber binder is also common. It has strong flexibility and uses thin layer construction method, which makes construction more convenient and environmentally friendly. Brick bonding is also stronger. Material entry: The materials needed will be stacked neatly before use.


Base treatment: firstly remove the dirt, oil stains and floating ash on the surface of the base layer; remove all paint layers and putty layers on the base layer; if the base layer fails to meet the flatness requirement, the base layer should be pre-leveled. Pre-shop: firstly deal with the color, texture, etc. of wall tiles


Third, what are the precautions for wall tiles?


贴墙砖


1. Pay attention to the wall tile before laying it. If cement mortar is used to lay the wall tile, the dry base layer should be sprinkled first to prevent it from absorbing the moisture in the cement mortar too quickly. The drum is delaminated.


However, if the wall tile is used, there is no need to sprinkle water; the corresponding product protection work prevents damage to other items during the process of wall tile handling and paving; such as the protection of windows, waterproof, water and electricity pipelines;


2, if there is no pulling before the paving, you need to first pull the hair; the wall brick that needs to soak the water should be completely immersed in the water, until it can be taken out without any air bubbles; the wall ground treatment inspection, the basic treatment of the wall Whether it meets or meets the requirements of paving wall tiles, if it does not meet, it needs to be rectified and repaired first.


3. After the wall tile is laid dry, the construction quality of the paved wall bricks is checked before the corresponding kitchen and bathroom installation work is carried out; the flatness of the paving is checked at any time during the process of brick paving.


Before the wall tiles are laid, pre-lay the bricks, and avoid the occurrence of too small narrow rows and wall tiles. Do not make joints to avoid artificially causing the wall joints to be uneven. The bricks are completely dried and solidified for 24 hours; when the wall tiles are laid, the cement mortar on the back of the bricks should be full and even. If there is cement mortar on the back of the bricks, it is necessary to replenish the slurry in time;


How about, I read the relevant introduction to the wall tiles, and I have learned a lot about the wall tiles. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.


More related wonderful reading:

What is the difference between wall tiles and floor tiles? Is the wall tile good or the floor tile good?

What is the most solid glue for wall tiles? How to choose firm wall glue

What is the most solid glue for wall tiles? How to choose firm wall glue

Does the balcony need to be wall tiles? What is the use of balcony wall tiles?

What kind of stickers are used for wall tiles? Steps to paste wall tiles

Steel POP UP Gazebo RANGE

Heavy duty steel range gazebos are an ideal entry level shelter for individuals and companies requiring a cost effective yet, professional and long lasting shelter. Robust enough to be used as a commercial unit and not to be confused with lesser quality domestic models available. The framework warranty is from 2 years to 3 years.

ALLOY COMMERCIAL GAZEBO RANGE

Our BEST selling range! SANJET offers varitey alloy pop up gazebos, from light to heavy weight and are popular with Schools, sports clubs, professional marquee companies, councils, market operators, professional outdoor catering companies and event organisers.

Gazebo

Gazebo,Tent,Shetler,Fordable,Steel,Aluminum

QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , https://www.sanjet.net

Posted on