Crimping pliers use method

The first edge of the crimping pliers is used for stripping. There should be approximately 1.5 mm of clearance when the pliers are closed. The second is used to cut off, there is no gap. The middle "convex" shape space is used to press the line, plug a crystal head into it and see if the eight serrations are exactly aligned with the copper sheet, do not use pressure, otherwise a crystal head will be scrapped.

In the production process of the cable, the crimping pliers are one of the indispensable tools, and they are also major players in ensuring the smooth flow of the network. The crimping pliers are not only used for pressing network cables, but they can be used to complete the tasks of trimming, stripping and pressing.

When pressing the wire, pay attention to the top of each wire to the front of the crystal head. The outer skin of the wire should also enter the crystal head two to three centimeters. The purpose is to prevent the thread head from falling off and increase the contact surface. The eight lines do not need to be stripped and pressed, and the copper in the crystal head will be embedded in the line in contact with the copper wire.

Explosion-proof crimping tools are made from beryllium bronze and aluminum bronze. The main scope of explosion-proof tools is: petroleum refining and petrochemical industry, coal mine, oil field, natural gas chemical industry, gunpowder industry, chemical fiber industry, paint industry, fertilizer industry, various medicines industry.