9 steps to clean the refrigerator
1. It is best to clean the outer casing of the refrigerator every day. Wipe the outer casing and handle of the refrigerator with a slightly damp soft cloth.
2. Cut off the power before cleaning the liner and take out the food in the refrigerator.
3, soft cloth on the water or utensils detergent, gently scrub, then wipe off the detergent to remove the detergent.
4. Remove the accessories in the box and wash them with water or detergent.
5. When cleaning the “switchâ€, “lighting†and “thermostat†of the refrigerator, please screw the rag or sponge to dry.
6. After the inner wall is cleaned, use a soft cloth to draw glycerin (medical open stopper) and wipe the inner wall of the refrigerator. It will be easier to wipe the next time.
7. Clean the seal with a cloth soaked in alcohol. If there is no alcohol on hand, wipe the seal with 1:1 vinegar water, the disinfection effect is very good.
8. Clean the ventilation grille on the back of the refrigerator with a vacuum cleaner or a soft brush. Do not use a damp cloth to avoid rust.
9. After cleaning, plug in the power and check if the temperature controller is set to the correct position.
Regular maintenance can extend the life of the refrigerator. Always unplug the power cord before servicing the refrigerator.
1. Always clean the dust on the back or bottom condenser and compressor of the refrigerator. Use a vacuum cleaner or a brush to remove dust. Be careful not to wipe the refrigerator and the compressor with a damp cloth.
2. When the refrigerator is deactivated for a long time, the power should be cut off first, all the food in the box should be taken out, the inside and outside of the box should be cleaned, and the box door should be opened for several days to make the box fully dry and dissipate the odor inside the refrigerator.
3. Check the drain. If the drain is clogged, water will leak into the refrigerator. Use a wire to dig a drain to remove anything that accumulates on the drain.
4. Do not neglect the cleaning of the door seal strip. Dilute the bleach with 10 times of water, rinse with a toothbrush, and then rinse off the bleach with water. The glue strip is dirty and easy to age, which will affect the sealing performance of the refrigerator and increase the power consumption.
5. Check vibration, noise, and compressor temperature. In the operation of the compressor casing, there should be no obvious vibration, and the sound of the compressor's obvious start should not be heard during the day.
6. Pay attention to check for cracks on the power cord to prevent leakage.
7. Wash and dry the inside and outside of the refrigerator with warm water or neutral detergent, and open the refrigerator door for ventilation and drying for one day.
Rubber Sheets Bed,Rubber Sheet Warehouse,Rubber Sheet Flooring,Rubber Sheet Lowes
EPDM Rubber Flooring,Bumper PlateCo., Lt d , http://www.nbconveyorbelts.com