Washing: Silk products are best completely dry cleaned. It is not recommended to wash, dry and iron. If you wash yourself, you should use neutral detergent, soak it in low temperature water for 15-20 minutes, then gently rub it, and rinse it with water. It is not suitable to use washing machine. It is not suitable to use alkaline soap. It should not be washed at high temperature.æ“æ‰, remember not to use washing powder, laundry soap, soap and other washing products, can not be mixed with other clothes, otherwise it will cause hair, hair, damage and fading.
Drying: Silk products should not be twisted and twisted after washing. It is not suitable for sun drying. It should not be used for drying in dryers. It should be lightly shaken and placed in a cool and ventilated place to dry. When drying, it should be anti-sunlight. Because the ultraviolet rays in the sunlight easily make the silk fabric yellow and fade.
Ironing: The anti-wrinkle performance of silk is slightly worse than that of chemical fiber. Therefore, there is a saying that “the steps are not true silkâ€. Silk products should be ironed at medium temperature (130 degrees-140 degrees) to prevent the silk from becoming brittle and the iron should not be directly Contact the silk surface to avoid aurora and fading. Avoid ironing when ironing. Avoid ironing on the front to avoid water marks.
The color, texture, feel
and visual effect of Marble Look Tiles completely achieve the realistic effect of natural marble, and the decorative
effect is much better than natural stone, which abandons all kinds of natural
defects of natural marble. Compared with natural stone, it has higher brightness,
low water permeability, no radiation, light weight, easy handling, and
convenient maintenance. It is especially suitable for indoor public space. It
has good wear resistance and gloss, in which the Polished Porcelain Tiles
surface is brighter and the hardness is high.
In addition to the high fidelity of Wood Look Tiles , the material difference makes it cheaper than the cost of solid wood. The tiles are almost non-absorbent, so you don't have to worry about mold and insects on wet weather. The surface is water-repellent and easy to clean. If it is contaminated with dust, it can be wiped directly with water. You don't need to "long-term care" like a wood tiles.
The surface of the Concrete Look Tiles like matt brick. If it is used as an interior decoration, there is no need to worry about light pollution. The visual effect is relatively simple and gives a very comfortable feeling. The material is very convenient to maintain, because of its surface-specific the texture, even if it is scratched, will not affect the visual effect.
The Stone Look Tiles has a smooth and clean surface, uniform color tone, clear and elegant texture, hard and delicate texture, no water absorption and pollution prevention, acid and alkali resistance, weathering, green environmental protection, no radioactive poisoning and other high quality. These excellent physical and chemical properties are unmatched by natural stone. It can be used in the interior and exterior walls, floors, countertops, etc. where stone construction and decoration are required.
Marble Look Tiles
Marble Look Tiles,Concrete Look Tiles,Stone Look Tiles,Wood Look Tiles
UMS New Materials Industry Co.LTD , http://www.ums-factory.com