â—‹
Lying
-
room
We can say in our lives that one-third of the time is spent in the bedroom, so the bedroom layout is particularly important. It is necessary to ensure that the bedroom is spacious, but also to ensure daily life needs. Let's take a look at the bedroom furniture dimensions and layout details that need attention.
 What size beds do you need for your bedroom?
â—† 10m2 bedroom with 1.2m bed, 10m2 to 20m2 with 1.5m bed, 20m2 bedroom with 1.8m above bed.
◆ From the perspective of interior design, the area of ​​the bed (the area of ​​the outer diameter) plays an important role in the overall effect of the bedroom. Too big or too small a bed can affect the beauty and use of the bedroom. It is best not to exceed one-half of the bedroom area. The ideal ratio should be one-third.
 What is the most convenient bedroom bed and high bed?
â—† The bed height is generally about 30cm, and the mattress is generally between 50cm-60cm, slightly higher than the knee, which is more suitable for Asians. The bed surface after laying the mattress is slightly more than 3-5 cm above the knee of the user. Too high or too low will cause inconvenience to the upper and lower beds. If there are elderly people and children in the home, they should use a bed height that is equal to or slightly lower than the user's knee to facilitate the upper and lower beds and avoid fall injuries.
How high is the bedroom bedside table and how wide is it?
â—† According to the size of the bed, the 1500mm bed will be placed around a 500mm bedside table. The 1800mm bed will need to be over 600mm wide, and the height is slightly lower than the bedtop.
 What TVs do you need for your bedroom?
â—† TV distance As shown in the above picture, the TV size is best from 37 inches to 42 inches.
 How high is the height of the bedroom cabinet and how deep is it?
â—† The height of the cabinet shall be at least 1700mm from the ground, and the depth of the cabinet shall not exceed 300mm.
â—† As for the reserved position of the wardrobe, it should be noted that the depth of the common wardrobe is generally 60cm. Considering the dimensions of the door and the drawer when opening, 60cm-90cm of space must be reserved in front of the wardrobe.
 Bedside paintings generally hang more?
â—† It needs to be divided according to the golden ratio, and the painting should be at least 1400mm from the ground. The paintings should be based on the bed and both sides should be 300mm from the bed.
How to set up bedroom night lights?
â—† You can choose the bedside lamp and put it on the nightstand directly. If it is a pendant lamp, it must be 10cm below the bottom of the bed.
What is the best place for a bedroom bed?
â—† The bed should be backed by a mountain, with its head facing south and its feet facing the north, conforming to the direction of geomagnetism. It is good for sleeping and the bathroom of the bedroom should be far from the bedside.
Do you want to leave space around your bedroom bed?
â—†Beside the bedroom bed should be left empty, whether it is a single bed or double bed, the general length is 2 meters, it is recommended to reserve 5cm-10cm space between the headboard and the wall, the foot and wall space, usually It is the aisle of the bedroom. It is recommended that the width of the aisle is not less than 70cm to facilitate the passage of family members.
â—† Â For a single bedroom, one side of the bed is placed on a reliable wall to increase the sense of security. For the double bedroom, as far as the type of apartment allows, the double bed should not be placed against the wall, and there should be at least 50cm space on both sides of the bed, which can not only place the nightstand, but also can facilitate the family to get out of bed and make beds and other activities.
This column mainly shows the parts of the crawler Excavator Final Drive.The Final Drive includes two parts: a Travel Motor and a Travel Gearbox.
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler excavator Final Drive, Travel motor, Travel Gearbox, Swing Device , Swing Motor , Swing Gearbox ,Hydraulic Pump, Main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
Final Drive
Excavator Final Drive,Excavator Spare Parts,Excavator Final Drive Parts,Mini Excavator Final Drive
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.juheng-cn.com