Adhesive is one of the marble installation methods. The adhesive remaining on the surface of the stone causes the loosening effect of the cemented minerals of the bonded stone due to the aging effect, so that the stone interior is relaxed and the surface is easily peeled off, thereby accelerating the aging of the stone. According to reports, the practical application of new types of marble adhesives shows that the agent has excellent water resistance, high bonding strength, low shrinkage, long shelf life, low temperature curing, rich colors and other properties, is an ideal new generation of marble adhesives , also expected to be used in ceramic tiles The structure of wood, wood and light metal materials is fixed and bonded. At present, the adhesive has obtained national invention patents.

Variety of marble adhesives

1) AH-03 marble adhesive: paste-like viscous adhesive made of epoxy resin and other high-molecular synthetic materials as base materials. Applicable to the bonding of marble, granite, mosaic, ceramic tile and cement base layer.

2) TAM type universal tile adhesive: It is a cement-based powder adhesive with a polymer modification. It can be used simply by stirring with water. It has good water resistance, durability, and low price. It is suitable for concrete and mortar. Walls, floors, plasterboards, and other surfaces are affixed with tiles, mosaics, natural marble, and artificial marble.

3) TAS type high-strength water-resistant tile adhesive: It is a two-component high-strength water-resistant tile adhesive that is resistant to water, resistant to various chemical substances, and has high strength. Applicable to the surface of concrete, steel, glass, wood and other paste a variety of ceramic tiles, wall tiles, floor tiles, used in kitchens, bathrooms, toilets and other places.

4) TAG-type tile caulking agent: The caulking agent is in the form of a powder, is a matching material for tile adhesives, has a variety of colors, and has a good water resistance, is suitable for the color of the tiles, can also be used in the swimming pool Tile joints.

Â Â

How to use marble adhesive

One: How to use

1. Surface treatment: The adhesive surface should be smooth, clean, dry, remove dust, oil and other impurities.

2, adjust the glue: the glue according to A: B = 2:1 weight ratio mixing evenly, with a plastic knife to glue the surface of the stone evenly.

3, curing: 24 hours after curing at room temperature can be put into the next procedure, when the temperature is low in winter, can be placed after the glue plate in 50-60 degrees conditions, after curing 1.5-2 hours to enter the next process, can be Improves the aging resistance and adhesive strength of the adhesive: it also improves the brightness of the panel.

4. It is also possible to add color paste or pigment to A glue to make it the same color as stone according to the color of stone. The amount of paste is about 1-2% of the glue.

II: Precautions

1, the construction temperature can not be lower than 5 Â°C, winter can be properly heated to increase the board temperature.

2. When the stone surface has chemical substances or oil, it should be cleaned and its dryness should be maintained.

3, glue is used now, adjust the amount of glue should not be too much; if the temperature is low, adjust the amount of glue, the use of time and curing time is long; the other hand, the curing time is short.

4. Do not mix the glue tools. Do not put the remaining glue after mixing back into the original package. Do not move the plate when the glue is not completely cured.

5. In winter, if the viscosity of the glue is large, the glue (A) can also be placed in a 40-80Â°C water bath to reduce the viscosity, but after heating, it must be cooled to below 40Â°C and then the curing agent (B) can be added.

6. Extrude excess glue after surface coating and continue to use it on other stones before curing.

7, due to the physical and chemical properties of stone, please try in advance to avoid mistakes. Do not mix lids, cover tightly, and do not allow entrance!

8, how to match the number of principles advocated when adjusting glue. It is ready for use and must be used within the available time. The more ingredients or the higher the construction temperature, the shorter the usable time.

Three: product storage and transportation

1. Sealed and stored in a cool, dry and ventilated place. After passing the inspection, it can be used continuously.

2. The stone adhesive is stored and transported as non-dangerous goods.

Â Â

What should I do if empty marble sticks on the back side?

Check the base surface:

1 The loose surface (dust, etc.) should be removed.

2 with clear water, water should be sucked dry to clear water.

3 oil, grease, should be cleaned

Inspection material:

1 Check whether the slurry is too dilute, and add water in proportion when the slurry is opened.

2 Check if the marble weight is too large, marble should generally be constructed from the bottom up.

Inspection process:

1 Check whether the thickness of dosing scratched is not enough.

2 Check if there is any dried mortar in the perforations, and periodically clean the tooth scraper.

3 Check if the squeegee is too fast and slow the squeegee speed.

4 if the glue is not uniformly stirred, the glue should be fully stirred.

5 Whether it is hot and dry due to the weather, and the scraping area is too large for each batch, resulting in the loss of water on the surface of part of the mortar.

6 The area of â€‹â€‹the scraping glue should be reduced each time, and no glue can be touched by hand without touching. It should be scraped and re-slurred.

Check tool:

1 Whether the product uses a suitable tooth form, empty drums should be used with a larger size scraper.

2 Check whether the slope of the tooth scraper and the base surface should be increased.

Editor's summary: The above is a description of the use of marble adhesives and precautions, I hope to help friends who have this need! For more information, please continue to pay attention to our website, follow-up will show more exciting content.

Marble Cabinet marble door marble kitchen cabinet bathroom marble decoration design window marble marble adhesive

Scomi Prima 3g Shaker Screen

Steel Frame Shaker Screen for Scomi Prima 3G Shale Shaker

SJ-Scomi Prima Shaker Screen, also commonly called Scomi prima 3G/4G/5G screen, refers to the replacement screen for Scomi Prima series shale shakers. The main shaker models are including SCM-PrimaG 3P/4P/5P linear motion shale shaker and SCM-PrimaG 4PDD cascading shale shaker. Screen quantity correspondingly varies by the different shaker models. The whole screen cloth is divided into independent small surfaces by rectangle perforated holes to prevent the part excessive expansive damaged.

Technical Parameter