Painter acceptance specification does not suffer from this

Paint is a common decoration material in decoration. Although the decoration is not complicated, in order to ensure the quality of the project, the owner still has to have some professional knowledge. In this way, it can be better accepted, but many people accept the paint Without knowing it, he did not know how to test the construction of the paint. Then, the next Xiaobian to introduce the painter acceptance specification.

Painter acceptance specification

1, clear water lacquer project water lacquer is mainly in the wood veneer veneer. There are generally two ways to make clear water paint: spray and hand brush. Acceptance of clear water paint is divided into: nail hole filled with putty ash must be consistent with the color of the veneer panel, and the distance from 1.2m far from the naked eye does not appear obvious color difference, the wood grain must be clear; veneer varnish touch back without a sense, with the palm of the hand Touch should be rich, bright, soft, straight edges; small areas do not allow wrapping, falling, wrinkled skin; uniform color, no brush lines; hardware accessories, glass must be clean, no paint pollution.

2. Contaminated mixed oil generally means that paint is directly sprayed on plywood or other wood and metal. Mixed oil spray and hand brush two. The acceptance criteria are: touch back without touch in the back of the hand, touch with the palm has a thick sense, richness, strong surface adhesion; no bottom, the same color; small area does not allow wrapping, falling, wrinkled skin and other phenomena; corner Straight, smooth surface; hardware accessories, glass must be clean.

3, mixed water paint project mixed water paint is a wood grain at the end of the paint, also called paint. The paint is mainly sprayed. Acceptance:1.2m far visually no color difference, uniform color, no touch in the back of the hand, touch with a thick feel, richness, strong adhesion to the surface, uniform under the wood grain; a small area is not allowed to have edge, flow Falling, wrinkled skin and other phenomena; edges straight, smooth and soft surface; hardware accessories, glass must be clean.

Paint construction process

1, paint materials must be qualified, must use high quality paint. During construction, first clean the site, minimize human activities and dust processes.

2, pay attention to check the cleaning of the grass-roots level, can be used 400# sandpaper lightly polished surface burr, clean with a clean towel, check the panel surface for any stains, damage can be used.

3, after the substrate is cleaned, putty on the transparent, according to the type of panel, brush or direct squeegee, transparent putty squeegee 2 times, painted 4 hours after the dry grinding, putty thin and uniform as well.

4, putty polished, transparent primer, transparent primer and special clear transparent bottom and curing agent, thinner ratio of 1:0.3:0.8 to 1. The transparent primer should be brushed or sprayed with 200# filter before use and brushed twice. After 4 hours of drying, polish with 400# sandpaper.

5. When spraying process is adopted, the site should be cleaned. The ground should be sprayed with a small amount of water to prevent dust and spray evenly.

Prevention of paint hazards

For the painter, first of all, protective measures must be taken. The overalls must be worn properly to reduce the direct contact between the body and the paint. Masks must be worn during construction to reduce inhalation of paint. The painter is a professional who has a high risk to the human body. It is not recommended to be engaged in paint spraying and other related work for a long time.

For ordinary people, we must not raise our awareness of the dangers of paint. We must not take it lightly nor be overly fearful. As long as we pay more attention to protection against the harmfulness of paint in daily life, we can get a healthy and pleasant working environment.

First of all, the indoor air should be tested to determine the degree of pollution and major harmful components. Then, according to the situation of harmful gases exceeding the standard, appropriate treatment methods should be selected to remove harmful gases. Maybe you will ask, there is no paint odor in my room, the material used in the decoration is also my carefully selected, each indicator is up to standard, it should not be harmful; because of the long-term toxic components Characteristics such as sex, concealment, etc., need to be professional together to detect the hazard of paint. We can choose some professional testing companies to carry out testing.

Editor's summary: About the painter acceptance specification is introduced here, I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.

Paint paint coating construction painter acceptance


For our led grow light series,we have 4 types for you choose.
  1. Octopus led grow light
  2. led grow bar light
  3. COB led grow light
  4. Double-sided LED Grow Lighting

LED Grow Lighting

Led Floodlight,Indoor Lighting,Led Street Light,LED Grow Lighting

Guangzhou ZG Scaffolding.co.Ltd , https://www.zgscaffolding.com

Posted on